New Style, “One Step Coupler:”

New Style, “One Step Coupler” allows for tools to be disconnected and reconnected, without a person returning to the pump’s “dump valve” to relieve pressure. It is “hot swappable”. The OSC Coupler is the ultimate in hydraulic connections.

Our large OSC coupling is very durable and will not fail if inadvertently disconnected while the tool is being used.

All "twin-line” systems can be easily upgraded to the the One Step Coupler. This maintains compatibility with older systems.

Another advantage of our OSC coaxial coupler is that it uses conventional twin-line hose…this reduces costs of upgrading. It is available on all our used sets.

To Connect: Push male and female couplings together while twisting the slide covering the female coupler until it locks in place.

To Disconnect: Reverse the connection process.

Standard Style Coupler:

The "standard" coupler is the typical coupler for all our used sets. It is the most common coupler today.

To Connect: Ensure the lock/slide on the female coupler is open (ensure the pin lines up with the slot), and then push the slide towards the back. Slide the male coupling in and let go of the slide. Twist the slide so that the pin does not line up with the slot (locking it).

To Disconnect: Twist the slide covering the female coupler so that the pin lines up with the slot and then push it towards the back.

Flat Face Couplings:

The flat-face female coupling style is typically a twin-line coupling, it is a No-Drip, Auto-Locking, Quick Coupler. This is one of the optional couplings for all our used sets.

To Connect: Simply push the two couplings together and they automatically lock in place.

To Disconnect: Twist the slide covering the female coupler 1/8-turn and push it towards the back.